A trip is the breaker doing its job
A breaker shuts a circuit off when it senses more current than the wiring can safely carry, or a fault that could cause a shock or fire. The question is which of those is happening.
1. Overload
Too many things running on one circuit, such as a space heater and a hair dryer, or a microwave and a toaster. The breaker trips after a few seconds or minutes of heavy use. Moving a load to another circuit usually stops it; if it happens often, the circuit or panel may be undersized for how the space is used.
2. Short circuit
A hot wire touching neutral or ground, often from a damaged cord, a failing appliance, or a loose connection in a box. Shorts trip the breaker instantly, sometimes with a pop or scorch mark. Don't keep resetting it.
3. Ground fault
Current leaking to ground, often through moisture. GFCI outlets and breakers trip on very small leaks to prevent shocks, which is why outdoor and bathroom circuits are more likely to trip in wet weather near the coast.
4. A worn breaker or loose connection
Breakers wear out, and loose or overheated connections in the panel can trip breakers that aren't overloaded. Warmth, buzzing, or a burning smell at the panel needs a professional.
What you can check
Unplug everything on the circuit, reset the breaker once, and plug things back in one at a time. If one device trips it, that device is the likely problem. If it trips with nothing plugged in, or trips again immediately, leave it off and have it checked. Never replace a breaker with a larger one to stop trips; the breaker size is set by the wire.