What the rating means

Your service rating, usually printed on the main breaker, is the most current the panel and service wires can supply to the whole house at once. Many older homes have 100-amp or smaller service; 200 amps is common in newer homes.

Is 100 amps enough?

It can be for a modest home with gas heating, cooking, and water heating. It gets tight when you add electric appliances, air conditioning or a heat pump, an EV charger, or an ADU.

A load calculation decides it

Rather than guessing, an electrician calculates the home's demand from its square footage and appliances using the method in the electrical code, then adds what you plan to install. That shows whether there's room.

Alternatives to a full upgrade

If you're close, options include a lower-current EV charger setting, a load-management device that pauses the charger when the house is busy, or circuit sharing. These can avoid or delay a service upgrade.

If you do upgrade

A service upgrade requires a permit, an inspection, and coordination with the utility (PG&E in most of San Luis Obispo County) to disconnect and reconnect power.

General planning information. Electrical work should be evaluated and performed by a licensed electrician.

Related services

All guides